by Indo Bismarck » Wed Jan 21, 2015 10:05 pm
After a week of drawing this in AutoCad here some more results, I added some more parts that for sure could be used on either other models or if something breaks than there is a spare pcs. I wonder who has still an Idea of what to draw. I will add Sonar and the lifting eyes for the rudders, Zink anodes, and will try the water marks (here I need measurements please help if you can). My friend was looking into rivets, but how small can we etch these is the question?? So if any of you got an idea, please let us know. I will also make this etch parts available to others when they turn out ok.
I am currently searching for a good font for the "Bismarck Name Plates", so as you can see there is a lot of questions still to be answered.
Here a list what has been drawn so far.
Etch Plate Bismarck 1:200 Trumpeter A4 size ( so there is still al lot of space for ideas)
All parts come with spare, if broken or lost by dismantling.
1 3 Eagle with swastika 10mm x 5mm
2 4 Bismarck Sign 0.05mm x 0.04mm
3 68 x 2 Ladder Iron Hull 2 x 2.5 mm plenty spare
Gratings open/closed
4 24 pcs 2mm x 2mm
5 20 pcs 2mm x 2,5mm
6 44 pcs 2,5mm x 2,5mm
7 20 pcs 3,0mm x 2,0mm
8 14 pcs 3,3mm x 3,0mm
9 20 pcs 4,0mm x 3,0mm
10 20 pcs 5,0mm x 4,0mm
11 20 pcs 5,0mm x 4,0mm
12 48 pcs 6,0mm x 4,0mm
13 20 pcs 7,0mm x 5,0mm
14 28 pcs 1,5mm �
15 28 pcs 2,0mm �
16 3 pcs 8mm x 16mm x 15mm (different length diamond shape)
17 3 pcs 8mm x 8mm x 9mm (different length diamond shape)
18 3 pcs 8mm x 12mm x 14mm (different length diamond shape)
19 3 pcs 8mm x 9mm x 11mm (different length diamond shape)
- Attachments
-
-
After a week of drawing this in AutoCad here some more results, I added some more parts that for sure could be used on either other models or if something breaks than there is a spare pcs. I wonder who has still an Idea of what to draw. I will add Sonar and the lifting eyes for the rudders, Zink anodes, and will try the water marks (here I need measurements please help if you can). My friend was looking into rivets, but how small can we etch these is the question?? So if any of you got an idea, please let us know. I will also make this etch parts available to others when they turn out ok.
I am currently searching for a good font for the "Bismarck Name Plates", so as you can see there is a lot of questions still to be answered.
Here a list what has been drawn so far.
Etch Plate Bismarck 1:200 Trumpeter A4 size ( so there is still al lot of space for ideas)
All parts come with spare, if broken or lost by dismantling.
1 3 Eagle with swastika 10mm x 5mm
2 4 Bismarck Sign 0.05mm x 0.04mm
3 68 x 2 Ladder Iron Hull 2 x 2.5 mm plenty spare
Gratings open/closed
4 24 pcs 2mm x 2mm
5 20 pcs 2mm x 2,5mm
6 44 pcs 2,5mm x 2,5mm
7 20 pcs 3,0mm x 2,0mm
8 14 pcs 3,3mm x 3,0mm
9 20 pcs 4,0mm x 3,0mm
10 20 pcs 5,0mm x 4,0mm
11 20 pcs 5,0mm x 4,0mm
12 48 pcs 6,0mm x 4,0mm
13 20 pcs 7,0mm x 5,0mm
14 28 pcs 1,5mm �
15 28 pcs 2,0mm �
16 3 pcs 8mm x 16mm x 15mm (different length diamond shape)
17 3 pcs 8mm x 8mm x 9mm (different length diamond shape)
18 3 pcs 8mm x 12mm x 14mm (different length diamond shape)
19 3 pcs 8mm x 9mm x 11mm (different length diamond shape)