The Ship Model Forum

Hi Everyone

This second project that I built up while the title is related to the premises .. then I do not need to rush because I was sitting in front of every model I've had to have the necessary sufficiency, so it take longer to prepare than to build it, while waiting for a response, criticism and suggestions from colleagues in this forum and I will really appreciate it all ..

here it is ..
1/144 HMS Novorossiysk

_________________
_"Drink Up My Darling Yoo Hoo"_


Under Constructions:
1/144 HMS Novorossiysk

cutout pattern to be printed to the plywood

_________________
_"Drink Up My Darling Yoo Hoo"_


Under Constructions:
1/144 HMS Novorossiysk

I print them with no carbon copy because it only took the outside line of the shape

_________________
_"Drink Up My Darling Yoo Hoo"_


Under Constructions:
1/144 HMS Novorossiysk

I also do not use when printing adhesive for plywood because it is a picture of my designs are still needed, I use a glass to flatten each other by way of tracing

_________________
_"Drink Up My Darling Yoo Hoo"_


Under Constructions:
1/144 HMS Novorossiysk

I cut the plywood into rough pieces for easier cutting shapes

_________________
_"Drink Up My Darling Yoo Hoo"_


Under Constructions:
1/144 HMS Novorossiysk

I cut with simple tools

_________________
_"Drink Up My Darling Yoo Hoo"_


Under Constructions:
1/144 HMS Novorossiysk

Keel structure is very tiring to be cut off should I do with a length of 8 meters

_________________
_"Drink Up My Darling Yoo Hoo"_


Under Constructions:
1/144 HMS Novorossiysk

with a simple tool I have to spend a full day to order the hull structure

_________________
_"Drink Up My Darling Yoo Hoo"_


Under Constructions:
1/144 HMS Novorossiysk

Hi Ome another scratch build best of luck with your build I will be looking in
Dave Wooley

Mr.Dave

I am glad you have responded to this project .. I can honestly say that I have been inspired by the Kiev project that you Build .. I have learned a few things in scratchBuilding through your thread .. to this day I reached the stage of fiber glassing the hull .. but it was still a long time since I have to collect pocket money to buy materials .. thanks Mr.Dave

_________________
_"Drink Up My Darling Yoo Hoo"_


Under Constructions:
1/144 HMS Novorossiysk

ome,this is total scratch building,i use a scrole saw to cut my frames and even that takes a long time.i salute you for doing it by hand.

Mr.Russclark
I'll take it in the most difficult and tiring even like it anyway. because even with my limitations, I would like to introduce this hobby in my country above my personal interests that have long loved this hobby, but a new one this month I found the fountain of knowledge and science in the development of this forum, thanks also to anyone who have shared knowledge in building projects in this forum.

Mr.Russclark

_________________
_"Drink Up My Darling Yoo Hoo"_


Under Constructions:
1/144 HMS Novorossiysk

repair pieces by hand to the keel top .. also by hand. LoL

improve the shape of the middle deck .. many forms are found to deviate after the simulation assembly .. because I start from the design plans and a copy of the results of scale editing in photoshop .. all messed up .. so I had to set it back in the form of plywood, which is why I do not use carbon paper when printing it to the plywood

marking with reference to the keel

make the line longer, I like smart people who are designing without a mirror (just kidding)

connect it with glue

precision is not as bad as I suspected, (He..he..heee)
this way I'm more the spirit to bring together all the frames

while this is the result of its structure

for this frame I have to use carbon paper because there is a transverse