The Ship Model Forum

The Ship Modelers Source
It is currently Wed Apr 02, 2025 11:21 pm

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 17 posts ] 
Author Message
PostPosted: Sat Dec 29, 2007 5:21 pm 
Offline
User avatar

Joined: Mon Jan 10, 2005 7:59 pm
Posts: 173
Location: Hamilton, Ohio
Would anyone know, or have access to information regarding Great Eastern's engine performance; particularly her screw engine's RPM?

Also, I've found a couple sources online that state that she had four paddle engines, but how two engines can share one single-throw crankshaft leaves me flummoxed...


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Sat Dec 29, 2007 6:49 pm 
Offline
User avatar

Joined: Sat Jan 22, 2005 10:18 am
Posts: 4131
Location: Liverpool
Ok here goes Just for the record The Great Eastern's original name was Leviathan.
The screw engine of the Great Eastern comprised of four horizontal direct- acting cylinders 84inches diameter by 48inch stroke which were to give a total indicated horse power of 4890 at 38.8 rpm .Steam was provided at 25lb/in2 by six double ended tubular boilers with a total heating surface of 30000ftsq. The paddle engine was slightly less powerful. They consistered of four oscillating cylinders 74inches diameter x 14ft stroke with a total Ihp of 3410 at 10 & 3/4 rpm . They were supplied with steam from four separate boilers at a pressure of 24 lb inch sq . These were rectangular or box pattern and their total heating surface was 19200ft sq . Hope this helps . Also for the record the Pub "The Great Eastern" on the banks of the river Mersey not far from were I live has many of the original ornate interior fittings incorporated into the decor.
Dave Wooley


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Sat Dec 29, 2007 7:49 pm 
Offline
User avatar

Joined: Mon Jan 10, 2005 10:52 am
Posts: 2557
Location: Land of the Cheshire cat
Dave, your not just a good modeller, your a mined of very usefull imformation, well done, and an asset to this web site. :wave_1: :wave_1: :thumbs_up_1:

_________________
Simple but effective.


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Sat Dec 29, 2007 9:15 pm 
Offline
User avatar

Joined: Mon Jan 10, 2005 7:59 pm
Posts: 173
Location: Hamilton, Ohio
Dave Wooley wrote:
Ok here goes Just for the record The Great Eastern's original name was Leviathan.
The screw engine of the Great Eastern comprised of four horizontal direct- acting cylinders 84inches diameter by 48inch stroke which were to give a total indicated horse power of 4890 at 38.8 rpm .Steam was provided at 25lb/in2 by six double ended tubular boilers with a total heating surface of 30000ftsq. The paddle engine was slightly less powerful. They consistered of four oscillating cylinders 74inches diameter x 14ft stroke with a total Ihp of 3410 at 10 & 3/4 rpm . They were supplied with steam from four separate boilers at a pressure of 24 lb inch sq . These were rectangular or box pattern and their total heating surface was 19200ft sq . Hope this helps . Also for the record the Pub "The Great Eastern" on the banks of the river Mersey not far from were I live has many of the original ornate interior fittings incorporated into the decor.
Dave Wooley
Thank you! :woo_hoo:

There wouldn't be any existing data on her performance under screw alone, would there?


Top
 Profile  
Reply with quote  
PostPosted: Sat Dec 29, 2007 11:11 pm 
Offline

Joined: Fri Mar 25, 2005 3:03 pm
Posts: 89
Location: London, England
Tom L. wrote:
Also, I've found a couple sources online that state that she had four paddle engines, but how two engines can share one single-throw crankshaft leaves me flummoxed...

The four paddle cylinders were arranged in two pairs, each pair forming an engine driving one wheel. Together with the screw, this made her very manoeuvrable, a useful quality when she was used to lay the Atlantic telegraph cable.

There's a spectacular model of the Great Eastern's paddle engines (sorry, no screw engine!) at the Science Museum in South Kensington. A small photo and some info can be seen here:

http://www.makingthemodernworld.org.uk/icons_of_invention/technology/1820-1880/IC.002/

_________________
"Religion is regarded by the common people as true, by the wise as false, and by the rulers as useful." Seneca, 1st century AD


Last edited by Roger T on Sat Dec 29, 2007 11:17 pm, edited 1 time in total.

Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Sat Dec 29, 2007 11:16 pm 
Wow, steam pressure =1.8 atms...


Top
  
Reply with quote  
 Post subject:
PostPosted: Sun Dec 30, 2007 6:44 am 
Offline
User avatar

Joined: Sat Jan 22, 2005 10:18 am
Posts: 4131
Location: Liverpool
Hi Tom l I managed to unearth a illustration of the propeller that was fitted to the Great Eastern .
Unfortunatly I'm unable to discover any further
information regarding the performance on propeller only.
I hope this may be of some use . :wave_1:

The Propeller as fitted to the Great Eastern consisted of four cast iron blades rivited to a cast boss .
Image
Dave Wooley


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Sun Dec 30, 2007 11:02 am 
Offline

Joined: Sat Sep 17, 2005 9:19 am
Posts: 1547
One word of warning when you're going to do your own research on the subject. Until compound engines with multiple screws become the norm in ships (after 1880) the words "cylinder" and "engine" we used in a rather confusing way. Sometimes the number of engines was used to indicate the number of shafts (or paddles), sometimes the number of engines was an indications of the number of cylinders. After 1880 this became very confusing , with multiple screws and triple or quadruple compound engines (think HMS Blake).
After the 1880's the current use of the word 'cylinder' and 'engine' was agreed upon.
About GE , the main "Eastern o holic" on the web is Russell Wild who can be found at a website called The Debris Field; http://russellwild.co.uk/settingsail/index.php


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Sun Dec 30, 2007 4:47 pm 
Offline
User avatar

Joined: Mon Jan 10, 2005 7:59 pm
Posts: 173
Location: Hamilton, Ohio
Pieter; thank you very much for the link, I've fired off an E-mail to Mr. Wild.

Dave; thank you very much for the drawing, and I have to say I'm awfully jealous of your having such extraordinary relics so close at hand!

Great Eastern pub, how lucky is that? :big_grin:

Roger; many thanks to you, also, for the link to the picture. What the rationale behind those oscillating engines was eludes me, but a more fascinating powerplant is hard to imagine.


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Sun Dec 30, 2007 7:00 pm 
Offline

Joined: Fri Mar 25, 2005 3:03 pm
Posts: 89
Location: London, England
Dave, great drawing of the screw!

Tom, as I don't live far from South Ken, I'll try and get down to the Science Museum soon(ish) and see if I can take some photos of the paddle engine model. I'll post 'em when done.

_________________
"Religion is regarded by the common people as true, by the wise as false, and by the rulers as useful." Seneca, 1st century AD


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Mon Dec 31, 2007 10:57 am 
Offline
User avatar

Joined: Sat Jan 22, 2005 10:18 am
Posts: 4131
Location: Liverpool
Roger T There is one particular publication "A Manual of Marine Engineering” by AE Seaton that is often considered a bible of marine engineering in the Victorian, post Victorian period. The copy I have is the nineteenth edition and although there are no specific references to the Great Eastern the book covers in great detail the marine engines of the period such as the Oscillating engine with charts relating to performance, propellers, rpm etc. Well worth tracking down a copy, you will not be disappointed.
Dave Wooley


Top
 Profile  
Reply with quote  
PostPosted: Wed Jan 02, 2008 7:31 pm 
Offline

Joined: Fri Mar 25, 2005 3:03 pm
Posts: 89
Location: London, England
How bizarre, my last repsonse, to Dave, vanished into the aether...

Anyway, all I wanted to say was:

[a] Ta for the book reference, Dave, I've already gone online and ordered a copy!

[b] Damn you, Dave, for making me open my wallet again!

_________________
"Religion is regarded by the common people as true, by the wise as false, and by the rulers as useful." Seneca, 1st century AD


Top
 Profile  
Reply with quote  
PostPosted: Tue Jan 08, 2008 10:22 pm 
Offline
User avatar

Joined: Fri Oct 19, 2007 2:25 pm
Posts: 777
Location: Phoenix, AZ
I did a little research on the ship a few years ago. You may find this site to be of some interest:

http://debrisfield.russellwild.co.uk/gr ... index.html

I have a fair number of book on the Great Eastern in my collection and would be happy to offer a little investigation if you are loking for any other information. I don't recall any references to her sailing under screw alone, aside from perhaps after damaging her original paddle wheels at sea.

--Scott

_________________
-- Scott


Last edited by reigels on Wed Jun 11, 2008 7:32 pm, edited 1 time in total.

Top
 Profile  
Reply with quote  
PostPosted: Mon Jun 09, 2008 3:08 am 
Offline

Joined: Mon Jun 09, 2008 12:41 am
Posts: 2
Location: Melbourne, Australia
Hello,

Doing my occasional net searching for info on the Great Eastern and chanced upon this thread.

Attached is a copy of the engine's indicator diagrams.

This came from a Lloyd's register staff association publication I picked up on ebay.

No figure reference was supplied, but the most likely reference source was the Birmingham Reference Library.

Image

Andrew

_________________
My website
http://www.users.on.net/~gippolot/Voyager.htm


Top
 Profile  
Reply with quote  
PostPosted: Wed Jun 11, 2008 6:47 pm 
Offline
User avatar

Joined: Fri Oct 19, 2007 2:25 pm
Posts: 777
Location: Phoenix, AZ
I recently found an interesting reference to the Great Ship in the Diary of Sir Daniel Gooch, who served on the board of directors and helped organize the first voyage to NYC, and the Cape May excursion.

http://www.archive.org/details/diariesofsirdani00goocrich

Worth a download if interested in the topic due to his personal connection to the ship. Also widely available as a reprint.

_________________
-- Scott


Top
 Profile  
Reply with quote  
PostPosted: Wed Jun 11, 2008 7:18 pm 
Offline
User avatar

Joined: Mon Jan 10, 2005 1:10 am
Posts: 2299
Location: (42.24,-87.81)
<I just have to say this is one of the most interesting threads on the board>

_________________
If an unfriendly power had attempted to impose on America the mediocre educational performance that exists today, we might well have viewed it as an act of war.

-- "A Nation at Risk" (1983)


Top
 Profile  
Reply with quote  
PostPosted: Sun Jun 15, 2008 3:52 am 
Offline

Joined: Mon Jun 09, 2008 12:41 am
Posts: 2
Location: Melbourne, Australia
reigels wrote:
I recently found an interesting reference to the Great Ship in the Diary of Sir Daniel Gooch,...

http://www.archive.org/details/diariesofsirdani00goocrich



Thanks for the link reigels. Gooch was an inspiring personality.

Andrew

_________________
My website
http://www.users.on.net/~gippolot/Voyager.htm


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 17 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Users browsing this forum: Majestic-12 [Bot] and 3 guests


You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group