| The Ship Model Forum http://shipmodels.info/mws_forum/ |
|
| 1/380 Revell NS Savannah and 1/380 Scratch SS Savannah http://shipmodels.info/mws_forum/viewtopic.php?f=59&t=394323 |
Page 1 of 2 |
| Author: | Triumph68 [ Fri Jan 03, 2025 11:37 am ] |
| Post subject: | 1/380 Revell NS Savannah and 1/380 Scratch SS Savannah |
Finally got this ship, now lets start, after cutting from sprue, cleaning and glueing together... some corrections must be done 1 filling portholes wrongly placed, drilling new 2 modifie opening of side full floor windows 3 Logo wrong place so cut away 4 take away circle relief around portholes 5 enlarging portholes Attachment: 4b.jpg [ 67.83 KiB | Viewed 1404 times ] |
|
| Author: | FFG-7 [ Fri Jan 03, 2025 12:13 pm ] |
| Post subject: | Re: 1/380 Revell NS Savannah |
take a look at this link https://archive.org/details/ship-design ... S+Savannah as it has the plans for that ship. |
|
| Author: | Triumph68 [ Fri Jan 03, 2025 12:59 pm ] |
| Post subject: | Re: 1/380 Revell NS Savannah |
Txs FFG-7, I already have plans... but more there are some great films on internet of her... I use them big time take a look at these, the first is the official launching /promotional picture made by the US gouvernment https://www.youtube.com/watch?v=SA8W2Xpz2hA&t=10s https://www.youtube.com/watch?v=sNQ305GVOFE |
|
| Author: | Triumph68 [ Sat Jan 04, 2025 12:05 pm ] |
| Post subject: | Re: 1/380 Revell NS Savannah |
some modifications on portholes Attachment: 6.jpg [ 103.88 KiB | Viewed 1343 times ] rounding the sharp edges Attachment: 1.jpg [ 99.96 KiB | Viewed 1343 times ] modifying the pool Attachment: 66.jpg [ 18.35 KiB | Viewed 1343 times ] Attachment: 67.jpg [ 62.3 KiB | Viewed 1343 times ] |
|
| Author: | Triumph68 [ Sun Jan 05, 2025 2:55 pm ] |
| Post subject: | Re: 1/380 Revell NS Savannah |
based on the inside shown in a Youtube movie , I took a sreenshot Attachment: WhatsApp Image 2025-01-05 à 18.54.33_bdc49ec5.jpg [ 197.43 KiB | Viewed 1307 times ] and cut out the door and windows of the rear big room near the pool Attachment: WhatsApp Image 2025-01-05 à 17.48.08_37846bd6.jpg [ 100.94 KiB | Viewed 1307 times ] As the windows of the bridge are to low behind the protective wall infront I raised the top piece with 1mm Attachment: WhatsApp Image 2025-01-05 à 17.48.08_5e3c1925.jpg [ 77.27 KiB | Viewed 1307 times ] Attachment: WhatsApp Image 2025-01-05 à 19.06.36_3135deda.jpg [ 45.94 KiB | Viewed 1307 times ] |
|
| Author: | Triumph68 [ Mon Jan 06, 2025 3:10 pm ] |
| Post subject: | Re: 1/380 Revell NS Savannah |
Today was a big day, continue making these difficult squaire windows Attachment: WhatsApp Image 2025-01-06 à 20.06.24_b9e29ced.jpg [ 62.58 KiB | Viewed 1279 times ] Attachment: WhatsApp Image 2025-01-06 à 19.55.17_bdbba31d.jpg [ 84.84 KiB | Viewed 1279 times ] a little before - now Attachment: 4b.jpg [ 72.44 KiB | Viewed 1279 times ] finnished Hull, including cut out for stabillisers Attachment: 3.jpg [ 73.06 KiB | Viewed 1279 times ] started making stabilisers Attachment: WhatsApp Image 2025-01-06 à 19.55.17_2203b9b7.jpg [ 22.35 KiB | Viewed 1279 times ] |
|
| Author: | FFG-7 [ Mon Jan 06, 2025 4:27 pm ] |
| Post subject: | Re: 1/380 Revell NS Savannah |
what are the 2 tab things sticking out of the bottom of the hull as not shown on the plans? |
|
| Author: | Triumph68 [ Mon Jan 06, 2025 4:44 pm ] |
| Post subject: | Re: 1/380 Revell NS Savannah |
they are to fix the ship (kit)on the stands lol... nothing to do wth the real ship |
|
| Author: | FFG-7 [ Mon Jan 06, 2025 4:52 pm ] |
| Post subject: | Re: 1/380 Revell NS Savannah |
oh, ok. |
|
| Author: | marijn van gils [ Tue Jan 07, 2025 4:37 am ] |
| Post subject: | Re: 1/380 Revell NS Savannah |
Good start!  And an interesting subject! |
|
| Author: | Triumph68 [ Tue Jan 07, 2025 12:49 pm ] |
| Post subject: | Re: 1/380 Revell NS Savannah |
all windows done, now the interior... I hope it will be visible ones the ship is done Attachment: 1a.jpg [ 115.29 KiB | Viewed 1218 times ] Attachment: 1b.jpg [ 116.83 KiB | Viewed 1218 times ] |
|
| Author: | Triumph68 [ Wed Jan 08, 2025 6:48 am ] |
| Post subject: | Re: 1/380 Revell NS Savannah |
finished the stabilisers and on the ship Attachment: WhatsApp Image 2025-01-08 à 12.25.00_d15b5cbe.jpg [ 52.31 KiB | Viewed 1193 times ] Attachment: 1a.jpg [ 77.92 KiB | Viewed 1193 times ] full ships view... and ... all decks are painted Attachment: 1b.jpg [ 98.56 KiB | Viewed 1193 times ] actually I mainly wanted to see how you can see thru the windows... Attachment: 3.jpg [ 113.18 KiB | Viewed 1193 times ] Attachment: 4b.jpg [ 94.28 KiB | Viewed 1193 times ] and yes .... with some help of light... you can see a lot of the rear recreation/ball room Attachment: WhatsApp Image 2025-01-08 à 12.25.01_e21ee7f1.jpg [ 33.5 KiB | Viewed 1193 times ] |
|
| Author: | Neptune [ Wed Jan 08, 2025 12:55 pm ] |
| Post subject: | Re: 1/380 Revell NS Savannah |
Very good looking and quite rare subject. You're doing a great job on it as well! 
|
|
| Author: | reigels [ Wed Jan 08, 2025 5:40 pm ] |
| Post subject: | Re: 1/380 Revell NS Savannah |
Nice work! Great project. |
|
| Author: | Triumph68 [ Thu Jan 09, 2025 11:46 am ] |
| Post subject: | Re: 1/380 Revell NS Savannah |
Txs guy's, I do hope you enjoy and yes.... not many of this kit around, and if ... some are at crazy prices, I was lucky to grab mine at a very reasonable price. Today I did some modification on the door openings of the top part. Attachment: 1a.jpg [ 112.5 KiB | Viewed 1133 times ] Attachment: 1b.jpg [ 128.85 KiB | Viewed 1133 times ] |
|
| Author: | Triumph68 [ Mon Jan 13, 2025 4:28 am ] |
| Post subject: | Re: 1/380 Revell NS Savannah |
a little before and after, know that modification is not yet finished Attachment: 1b.jpg [ 172.63 KiB | Viewed 1032 times ] and same but with between fully cut before re-buiding up Attachment: 1a.jpg [ 238.01 KiB | Viewed 1032 times ] |
|
| Author: | Triumph68 [ Sat Jan 18, 2025 7:51 am ] |
| Post subject: | Re: 1/380 Revell NS Savannah |
I decided to keep the Loadig hatches closed and to not use the added bleu line sticker but to paint it Attachment: 1a.jpg [ 167.55 KiB | Viewed 972 times ] I also got a bit more done on top part Attachment: 1b.jpg [ 94.32 KiB | Viewed 972 times ] Attachment: 1c.jpg [ 96.64 KiB | Viewed 972 times ] not sure yet where I stop detailing that big room there Attachment: 1d.jpg [ 169.46 KiB | Viewed 972 times ] |
|
| Author: | JIM BAUMANN [ Sun Jan 19, 2025 4:33 pm ] |
| Post subject: | Re: 1/380 Revell NS Savannah |
Elegant ship, a classic kit but old schoolkit-- deserving of your extensive work! well done JB |
|
| Author: | Triumph68 [ Tue Jan 21, 2025 9:49 am ] |
| Post subject: | Re: 1/380 Revell NS Savannah |
Txs Jim little by little it goes on and on... Attachment: 1b.jpg [ 124.53 KiB | Viewed 895 times ] Attachment: 1c.jpg [ 202.39 KiB | Viewed 895 times ] an opening in the kits Bow... way to big and wrongly placed, so I closed it Attachment: 1a.jpg [ 60 KiB | Viewed 895 times ] ah well, this we will see Attachment: 1d.jpg [ 165.51 KiB | Viewed 895 times ] some work done on most rear castle Attachment: b.jpg [ 33.65 KiB | Viewed 895 times ] Attachment: 1f.jpg [ 47.56 KiB | Viewed 895 times ] Attachment: 1e.jpg [ 181.3 KiB | Viewed 895 times ] |
|
| Author: | Triumph68 [ Wed Jan 22, 2025 8:40 am ] |
| Post subject: | Re: 1/380 Revell NS Savannah |
a 2 week time out from warf so here is here state of being atm ... a realy nice looking ship to me Attachment: 1a.jpg [ 45.27 KiB | Viewed 859 times ] Attachment: 1b.jpg [ 100.16 KiB | Viewed 859 times ] Attachment: 1c.jpg [ 112.79 KiB | Viewed 859 times ] Attachment: 1d.jpg [ 66.53 KiB | Viewed 859 times ] |
|
| Page 1 of 2 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|