The Ship Model Forum

I think the 2 flag messages would be on the same flag line but at 2 levels with the HX2 at the top with the IZ below it with gap between the 2 messages.

Thanks FFG-7 indeed there should be a tackline that creates a 6 feet gap between messages
Thanks again for your help

Dear all here is today's update on the Carrier.
I made some corrections on Island's port docking bridge, I made it too thin.
Then I placed port’s railing and catwalk with stern's ladders and platforms.
Finally I started pilot house. Enjoy

you are welcome.

Dear all here is today's update on the Carrier.
Thanks to the recent deep dives I added some extra details on and next to pilot's house.
Since kit is really lacking, obviously, of those details, I will try to replicate as realistic as possible all these "add-ons"
So enjoy

Dear all here is today's update...

More details on the Island

I added more details to the upper level of the pilot's house again thanks to the dives...

plus I made a platform  that was not on the kit to place the lower part of the tube that will hold the for bow's MK33 open topped Fire director.( I think at Coral Sea it wa still the mk33 than mk 37)

Finally I placed the catwalk on bow's chimney. 

Enjoy

Dear all here is today's update on Yorktown's Island.
I started the Mk33 open topped fire director
Enjoy


I also posted the video on Youtube of Part 1 of Island built

https://youtu.be/SxMhQFuwXSY?si=BADjom-YxL8VUhov

Hello everyone here is today's update on Yorktown's Island.
Placed the mk33
Added details on the Pilot's house

Enjoy

Dear all l made 2  massive mistakes...daaaamn

1. l mounted  the pilot's house upside down...such a dumass 

2. I glued the mk33 180° the wrong way....

Sooo l had to remove very delicately everything... but l broke a couple of things and l had to repair them.

The pilot's house is in place, l have to re-glue the stairs and add details.

The 2 mk33 will be placed very soon 

you are not the only person to reverse the 2 directors as I had to show another modeller on another site who was following his 1/700 scale model instructions that the orientation was wrong. he corrected his & told his friend who had done the same thing.

Thanks FFG-7 I’m sooooo happy l saw it in time...

you are welcome as you would not be very happy if you had wrecked the pe while doing corrections.

I did wrecked some pe but l manage to make all the corrections...thank u for your comments and support

And here are the corrections...and l added the catwalk on the funnel

I see you added the battle lookout to the front of the pilot house that you did not have in the previous pictures. when did you release it was missing?

You have an eagle eye....well l saw it on an original picture and l wanted to put it in.
Luckly l built it because when I was measuring its position l noticed the mistake in the pilot house.
I made the correction and i dry fitted the battle lookout...

is also on the Sheet 3 - Outboard Profile Starboard of the ship's Booklet of General Plans 1940 which I have the plans saved on my computer & getting close to finishing the cleanup of the last 5 sheets.

Dear all...added the flag baskets and the details on the funnels..
Enjoy
Ps
FFG-7 l will post soon the picture of the battle lookout

Dear if you want to check it out l posted a new video on my channel

Enjoy

https://youtu.be/agzvEvd4eko