The Ship Model Forum

1.County Class Cruiser - beautiful ships!
2.Town or Colony Class Cruiser
3.V&W Class destroyer
4.Illustrious Class Aircraft Carrier
5.Ajax or Achilles to go with the Graf Spee

_________________
In 1757 Admiral John Byng was shot "pour encourager les autres". Voltaire

All WW2 please -

HMS ARK ROYAL

HMS VICTORIOUS + SWORDFISH!

HMS RENOWN - Already in 1/700 but this is about 1/350 right?

HMS SUFFOLK

HMS AJAX

TRIBAL CLASS DESTROYER - COSSACK?

I'll base my choice on whats missing in 1/350 plastic, hang on thats most of the WW2 RN fleet

So i'll go for
1)Leander class
2)County class
3)Arethusa class
4)Southampton class
5)Dido class

Five is the limit so no room for destroyers, RN 1/350 is a big, big hole in the market that needs filling.

Roy

_________________
IPMS Fine Waterline special interest group www.finewaterline.com

British seems to be the current favorite so here goes:
Rodney, 41 like May 41!!!/ Nelson, not 45 but earlier, maybe with UP mounts all over.
Ark Royal
Norfolk/Suffolk/Dorsetshire
Dunkerque/Strassburg
Atlantis, German disquised cruiser

My votes,

1. Essex SCB 125
2. Alaska class CB
3. Big five pre war and rebuilt ( Tennessee, West Virginia, California)
4. Normandie
5. Des Moines or Oregon City class CA

Scott S

_________________
What, me worry?

My top 5 of un-announced ship kits would be:

1) Bagley/Benham/Gridley DD 1942
2) USS Freedom LCS-1
3) Z1 German Destroyer
4) Gato/Balao class sub
5) British "E" class destroyer

All 350 scale with waterline option.

HMS Rodney

HMS Illustrious (WWII)

HMS Dido

USS San Diego

IJN Tone

_________________
/Magnus

What about GUPPY versions or a one off Growler SSGN with Regulus missiles?

_________________
Drawing Board:
1/700 Whiff USS Leyte and escorts 1984
1/700 Whiff USN Modernized CAs 1984
1/700 Whiff ASW Showdown - FFs vs SSGN 1984

Slipway:
1/700 Whiff USN ASW Hunter Killer Group Dio 1984

Sure, put that down

_________________
De quoi s'agit-il?

I like Brads ideas for some Aussie boats. I also prefer modern cold war to post coldwar ie 70's 80's 90's
But I would say my 5 are:

A CGN cruiser eg CGN 35 - Truxton
A CGN 38 - Virgina class
An 80's USS Midway CV41
and an 80's CV, Any of Prefer Kittyhark or America
CGN9 Longbeach - The first Nuclear boat and a unique shape

Anyway that my 2cent for what its worth
Dave

_________________
1/350 Slipway:
USS John C Stennis

Stennis CBG 2002:

Operational:
CG73 USS Port Royal
DDG73 USS Decatur
CG57 USS Lake Champlain
FFG33 USS Jarrett

LHD5 USS Bataan

HMAS Vendetta II D08
IJN Yamato
HMAS Vendetta I I69

Planned
DD967 USS Elliott

1. Big five pre war and rebuilt ( Tennessee, West Virginia, California)
2. FRAM Gearing
3. A CGN 38 - Virgina class
4. Adams DDG!

Like Mark said, but it ani't gonna happened.

I think it would be pretty cool to see any of the following, but this is my pick in order:

1. Des Moines-class (with an option to make 1972 USS Newport News)
2. Oregon City-class CA
3. Virginia-class CGN
4. USS Midway 1980s
5. Sachsen class frigate

_________________
Proper Preparation Prevents Poor Performance

Well, since you have asked!
I would love to build.....

1. A Brooklyn class light cruiser (USS Bosie)

2. An Omaha class Light Cruiser (USS Marblehead)

3. An Italian BB from WWII (Pick one, any will be welcome!)

4. I second the Dutch Java or De Ruyter.

5. Only one more choice....... USS Wasp CV-7

_________________
Dan
Field Artillery, King of Battle
Please check out the Secret Society of Model Builders on facebook.

Here humbly,are my top five:

1) Leander and Improved Leander Class - Gives you fourteen possible ships from four Countries and alot of them played a big part in historical battles (Ajax, Achillies, Leander, Sydney, Perth). One of the first two would sell off the back of the Graf Spee kit into a market that is ripe for it and the success could bankroll the variants and keep the molds in demand for a long time. And its a small market here in Oz but a Sydney would be the best selling 1/350 model for years to come.

2) Enterprise and first Yorktown - I know you wont do them, but the market place has been asking for them for years, and they would be HUGE SELLERS! Huge! Besides, you dont ask, you dont get. Also, if you wont do them, just do the Hornet's Hull so we could have a single semi-accurate Yorktown Class, Trumpys kit sucks big ones!

3) HMS Dreadnaught - One of the few ships I would go off period (WWII) for. Massive historical significance.

4)RAN V Class Destroyer - Scap Iron Flotilla WWI Destroyers punching above their weight in WWII. 23 possible ships across three countries, England, Canada and Australia. Small kit - quick to market.

5)Wasp - Poor little stand alone carrier that fought everywhere and the only US carrier to fly Spitfires off its deck. Should be a popular subject - especially with 1/350 Spits!

6) I can't count, and I would walk a mile over broken glass on my testicles for an Ark Royal or similar RAN WWII carrier, just dont tell the wife.

The IJN is saturated, the USN pretty well covered as well as the Kriegsmarine, but appart form the battleships the RN is virtually non existant, they do deserve at least one carrier!?! Just my two cents worth, but want to take the oppurtunity to thank Dragon for actually asking the enthusiasts what they want! Cant wait for the Zestroyer and the CVL!!!!

I'll go for some odd ones close to my heart...

1. USCGC Alert (my first ship out of the Academy)
2. USCGC Dallas (I was Ops on her)
3. USCGC National Security Cutter
4. USCGC 180' buoy tender
5. USCGC Storis

Extra Credit USCGC 82' Point Class in 1/72

Thanks!

1. Yorktown Class Carrier - with correct hull
2. 4 Piper Flush Deck in WWII, include variants such as DMS, AVD
3. County Class Cruiser - Dorsetshire, Norfolk, Suffolk are standouts
4. Casablanca Class CVE
5. Zeilin APA (Something different, very distinguished War record and wouldook good on a model shelf alongside all the warships)

And of course these will be released in 1/700 as well, A la Laffey, Livermiore etc

Dragon should be congratulated for this novel approach in this industry for asking the customer what they want.

Here is my vote:

1/ the obvious choice: The world war two cruisers of the Leander & Perth (improved Leander) classes notably: HMS Ajax, HMS/ HMZS Achilles, HMAS Sydney & HMAS Perth.
All these ships and their sister ships can be built basically from one set of tooling with funnel changes etc.

2/ World war two era Illustrious class aircraft carriers: HMS Victorious and/or HMS Formidable during Operation Pedestal 1942, with cross decked Seafires (Spitfires), Sea Hurricanes, Fulmer and Wildcat aircraft!
The tooling would also be good for HMS Illustrious. With late war British/ US aircraft. And ship modifications mini kits extra sales could be made.

3/ World war two era Town class cruisers HMS Sheffield or HMS Belfast.

4/ World war two era J, K &N classes: HMS Kelly, HMAS Napier and or other Australian, British, Dutch or Polish ships of the class.

5/ World war two era S,T,UV,W,Z and C classes of fleet destroyers basically one design of over sixty ships serving many nations.

1/350:

1) USS Midway any era
2) CGN 38 - Virgina
3) Vietnam Essex Class SCB-125
4) Tribal class
5) CGN9 Longbeach

In case any of these are "no ways" then substitute it for a Flower class.

Thank you!

_________________
http://www.f-16.net
http://www.c-130.net

Building:
1/48 Lancaster (HK)
1/350 Akagi
1/350 IJN Kongo

Dear Dragon- Thanks for asking. Here are my choices for 1/350 scale kits, in no particular order:

1. An Omaha class would be great. Sleek looking ships with long service lives with a variety of fits and camouflage schemes = lots of repops with minor mold variations or additional parts runners.
2. A Vietnam era Essex. Lots of veterans still living would want one of those in their den instead of the sucky, overpriced wood ones from the Philippines.
3. HMS Ark Royal from WW II - Isn't it natural to display antagonists together? Who can't think of Bismarck without thinking of Ark Royal tripping him up.
4. I'd love to see an accurate Northampton class cruiser in 1/350, except if they did one in that scale they'd also do one in 1/700 and I'd practically be out of the resin business.
5. An amphibious invasion set with LCI's, LVT's, Higgins boats, LCVP's, LCT's and the like, or a harbor set with tugs and support vessels. (Okay, so that's 5-1/2. So what?)