1/350 Overlord diorama

Moderators: BB62vet, MartinJQuinn, JIM BAUMANN, Jon, Dan K

User avatar
mmaresm
Posts: 502
Joined: Wed May 30, 2007 12:26 am

Re: 1/350 Overlord diorama

Post by mmaresm »

Oh MY!! So many 'little men'!!!

I haven't seen the rest of you diorama history, but ..... DID you Paint Each Man??!!

WOW :thumbs_up_1: :cool_2:

Mario
StevenVD
Posts: 610
Joined: Fri Dec 27, 2013 6:32 pm

Re: 1/350 Overlord diorama

Post by StevenVD »

Thank you, Mmaresm. The men got a base color with airbrush and a bit of a shadow where possible, but most of it is pencilled on. Rigging is now done with 2 different Van der Rosten threads.

Image

The Infini chain for the front hatch is quite fine. Not as fine as needed, but almost.

Image

The fine thread is hardly visible in single strands.

Image

It takes some fidgeting to apply it to the yardarms and down again.

Image

Thicker thread is used for the tension cables.

Image

Some ropes will follow a bit later in the assembly.

Image

I used some track rust product for aging the hull.

Image

Vallejo Natural Steel paint is applied to the LCVP's with sponge fragments. On the pictures the lower sides are painted rather in a continuous dark color with each a "C" indication. The large ships are treated with green muck and dried salt from a weathering set.

Image

Image

Image

Image

Image

Image

Image

Image
StevenVD
Posts: 610
Joined: Fri Dec 27, 2013 6:32 pm

Re: 1/350 Overlord diorama

Post by StevenVD »

I had not enough scrap material to fill the flatbeds of the trucks.

Image

But I still had enough L'Arsenal barrels, crates and bags from the Columbia build so some could be spared.

Image

A bit later all the vehicles were glued to the deck. That calls for some pictures.

Image

Image

Image

Image

Image

Image

Image

Image

Image
StevenVD
Posts: 610
Joined: Fri Dec 27, 2013 6:32 pm

Re: 1/350 Overlord diorama

Post by StevenVD »

After the application of the figures, some pigments were used for the sand part. For the lighter sand yellow and white sand were needed, for the wet part it was Russian Earth.

Image

Image

Then the matt coat was sprayed on the dry part and gloss was brushed on the seascape. After some small repairs of stuff that was blown away, the dio is considered to be finished:

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

The plexiglass cover is such a perfect fit, that one part of the M26 on the side might get pinched off.

Image

Like that it will be presented on the fall events.
Pieter
Posts: 1604
Joined: Sat Sep 17, 2005 9:19 am

Re: 1/350 Overlord diorama

Post by Pieter »

Beautiful. I'm looking forward to seeing it in one of those fall events.
StevenVD
Posts: 610
Joined: Fri Dec 27, 2013 6:32 pm

Re: 1/350 Overlord diorama

Post by StevenVD »

Thanks, Pieter, I hope to meet you there also with a ship! I made some detail pictures:

Image

Image

Image

Image

Image


Image

Image

Image
User avatar
Neptune
Posts: 2455
Joined: Sun Mar 13, 2005 11:51 am
Location: Belgium

Re: 1/350 Overlord diorama

Post by Neptune »

Great job, but not sure about that anchor though.
Normally they'd drop the stern anchor to assist in getting off the beach again, but the forward anchor would be strange.
Also, anchors drop straight down, additional chain will just pile up on top of it. The bow of the ship should have shifted to starboard on the beach after dropping the anchor to achieve the layout you have, seems somewhat unlikely.
Most people won't notice though. :heh:
If you have pictorial evidence then of course it's a valid detail.

Love the crowded nature of the dio. :thumbs_up_1:
The merchant shipyard
User avatar
Walter Sonderman
Posts: 82
Joined: Fri Jan 16, 2015 1:12 pm
Location: Alkmaar, The Netherlands

Re: 1/350 Overlord diorama

Post by Walter Sonderman »

Hi, Steven,

nice work again! Agree with Neptune's remark on the anchor. A small detail imho though: we are building models, it is not real :big_grin: . Had several discussions about that latter remark in the past :woo_hoo: .

Cheers, Walter
StevenVD
Posts: 610
Joined: Fri Dec 27, 2013 6:32 pm

Re: 1/350 Overlord diorama

Post by StevenVD »

StevenVD wrote: Image

Image
These are the only pictures I had to work with for LST 52, they clearly show the anchor distanced from the hull, even further than I could extend it because of the LCT nearby. Only my latest pictures show that, I had to remove it from the hull when I noticed.
User avatar
Neptune
Posts: 2455
Joined: Sun Mar 13, 2005 11:51 am
Location: Belgium

Re: 1/350 Overlord diorama

Post by Neptune »

Well considering that picture, she was too long on the beach, the tide must have pulled the vessel off, as she looks empty and lonely in the picture.
I do wonder why she dropped it in the first place, perhaps an engine failure with the anchor being dropped to slow her down? Or a standard procedure to avoid being dragged off the beach during unloading?
Are you sure it's actually a chain and not a steel wire in the picture? Sometimes they use steel wire since you can store it on a winch drum without the need for a chain locker. (not allowed for real navigation anchors nowadays)

In any case, I agree with Walter that we're modelmakers, it's not real :big_grin:
The merchant shipyard
Dan K
Posts: 9044
Joined: Tue Jan 11, 2005 10:56 am
Location: New York City

Re: 1/350 Overlord diorama

Post by Dan K »

Everything is coming along wonderfully.
StevenVD
Posts: 610
Joined: Fri Dec 27, 2013 6:32 pm

Re: 1/350 Overlord diorama

Post by StevenVD »

Thanks for the reaction. I found one picture where the LST's take on their load and there are both anchored and unanchored ships, even when there is a quay to moore on. I might have used finer chain, I think I used some from Birmingham in stead.

Image
User avatar
Neptune
Posts: 2455
Joined: Sun Mar 13, 2005 11:51 am
Location: Belgium

Re: 1/350 Overlord diorama

Post by Neptune »

Interesting picture indeed. Seems a variation on Meditterranean mooring, where a ship would moor stern-first to a quay wall and then drop the anhors to stay perpendicular to the wall (in reality, the anchors are dropped first of course)

So mooring the bow of these ships makes sense, I'd assume they also deployed the stern anchor to keep their sterns from crashing into each other.
Why some have deployed the bow anchor remains a mistery though...
The picture is a good idea for your next diorama though :heh:
The merchant shipyard
User avatar
dhenning
Posts: 351
Joined: Sat Oct 05, 2013 1:32 pm

Re: 1/350 Overlord diorama

Post by dhenning »

Very nice work!
marijn van gils
Posts: 2686
Joined: Tue Feb 06, 2007 10:24 am
Location: Belgium

Re: 1/350 Overlord diorama

Post by marijn van gils »

You have been busy Steven! :thumbs_up_1: :thumbs_up_1: :thumbs_up_1:

I'm looking forward to seeing this in the flesh at SMC. ;)
Pieter
Posts: 1604
Joined: Sat Sep 17, 2005 9:19 am

Re: 1/350 Overlord diorama

Post by Pieter »

They may have done this at a higher tide than when the picture was taken to get the ships as high as possible on the beach by using their anchor winches. One of the reasons the British developed BARVs was that getting these anchors (and the LSTs) out again proved to be rather difficult. https://en.wikipedia.org/wiki/Beach_arm ... ry_vehicle
Neptune wrote:Interesting picture indeed. Seems a variation on Meditterranean mooring, where a ship would moor stern-first to a quay wall and then drop the anhors to stay perpendicular to the wall (in reality, the anchors are dropped first of course)

So mooring the bow of these ships makes sense, I'd assume they also deployed the stern anchor to keep their sterns from crashing into each other.
Why some have deployed the bow anchor remains a mistery though...
The picture is a good idea for your next diorama though :heh:
Last edited by Pieter on Fri Sep 15, 2023 8:34 am, edited 1 time in total.
User avatar
Devin
Posts: 2498
Joined: Mon Jan 10, 2005 10:46 am
Location: Hoboken, NJ
Contact:

Re: 1/350 Overlord diorama

Post by Devin »

This looks outstanding. Your weathering is spot-on. As Marijn said, I hope to see this at SMC next month.
We like our history sanitized and theme-parked and self-congratulatory, not bloody and angry and unflattering. - Jonathan Yardley
StevenVD
Posts: 610
Joined: Fri Dec 27, 2013 6:32 pm

Re: 1/350 Overlord diorama

Post by StevenVD »

Everybody thanks for the replies. The dio has won bronze at the IPMS Nationals at Waregem last weekend. Some pictures were made by the L'Arsenal crew to illustrate the products they sell on their site.

https://modelbrouwers.nl/phpBB3/viewtop ... 23&t=55212

Image
User avatar
Iceman 29
Posts: 1945
Joined: Tue Sep 29, 2020 4:35 pm
Location: Bretagne, France

Re: 1/350 Overlord diorama

Post by Iceman 29 »

Great job! :thumbs_up_1:
Pascal

�Battleship Bretagne 3D: https://vu.fr/FvCY
�SS Delphine 3D: https://vu.fr/NeuO
�SS Nomadic 3D: https://vu.fr/tAyL
�USS Nokomis 3D: https://vu.fr/kntC
�USS Pamanset 3D: https://vu.fr/jXGQ
User avatar
Neptune
Posts: 2455
Joined: Sun Mar 13, 2005 11:51 am
Location: Belgium

Re: 1/350 Overlord diorama

Post by Neptune »

Congrats with the price. It came out beautifully and still quite small.
Is that base made for a case later on? or was it removed for the contest/pictures?
The merchant shipyard
Post Reply

Return to “Works in Progress”