*3D printed models* Upcoming Ship Releases

[maxim]

Fpmodel on Shapeways released in 1/700, 1/1200, and 1/1250 another Austrian-Hungarian (KuK) torpedo gunboat (in that case almost a destroyer):

SMS Magnet
https://www.shapeways.com/product/67ZNL ... arketplace

/edit:

Micro Master released

1/700 British 4"/50 (10.2 cm) BL Mark VII Gun x6
https://www.shapeways.com/product/SBW5P ... arketplace

Now only the Boadicea, Blonde, and Active class scout cruisers equipped with that gun are missing

[Haijun watcher]

For those interested in Cold-War and modern era British Royal Fleet Auxiliary (RFA) ships, the Shapeways vendor "Mini and Beyond" offers a number of auxiliaries, some of which served in the Falklands War.

Most of these RFA offerings can be found at the "Calling All Royal Fleet Auxiliary fans" thread.

[maxim]

New 3D printed model by Dutch Fleet Naval Miniatures in 1/700:

Russian landing craft Project 21820 Dyugon
https://www.shapeways.com/product/UATMH ... d=65257929

[maxim]

New by Fpmodel in 1/700:

Austro-Hungarian torpedo cruiser SMS Panther
https://www.shapeways.com/product/27GCT ... arketplace


https://commons.wikimedia.org/wiki/File ... uselang=de

[Haijun watcher]

Russian Boris Chilikin class oilers are now available from Shapeways, as posted already on the "Calling All Boris Chilikin class AOR fans!" thread.

[Haijun watcher]

The Chinese PLA-Navy's Qiandaohu/Fuchi class replenishment oilers are now available in 1/700 on Shapeways, as posted on the "Calling Fans of Chinese oilers (Type 903/Type 903A etc)" thread.

[Haijun watcher]

A 3D-printed island for the 2nd Chinese aircraft carrier Shandong (Type 001A) is now available from Dutch Fleet Naval Miniatures, as I stated on the "Calling Fans of Chinese aircraft carriers" thread.

Presumably, one could just add this island to a Trumpeter 1/700 kit of her half-sister ship Liaoning, considering how similar the two vessels are.

[Haijun watcher]

The Shapeways vendor "Bills' models" is offering a 1/700 Cyclone class patrol craft, as posted on the "Calling all Cyclone class Patrol Ships!" Fans" thread.

[maxim]

diStefan 3Dprint offers these launchers with missiles in 1/700 (also in many other scales):

Mk 10 Terrier
https://www.shapeways.com/product/5EABF ... areProduct

Mk 12 Talos
https://www.shapeways.com/product/EHK6F ... areProduct

[raggs]

Since Waveline went T/U with their 1/700 waterline T3 Neosho/Cimmaron tanker, I'd love to see this as printed model.
It probably wont make you rich, but it will fill a niche.

Regards,

Raggs

[maxim]

The Neosho class in 1/700, because of its size, would be for current printing methods either very expensive or would be printed only in very bad quality - and anyway you would have to find someone to design the 3D model.

[raggs]

OK, Maxim, fine explanation, I understand and get what you are conveying. Just holding out a glimmer of hope...

Raggs

[maxim]

New ships for the KuK Kriegsmarine by Fpmodel on Shapeways in 1/700 (plus 1/1200 and 1/1250):

Austro-Hungarian torpedo cruiser SMS Tiger
https://www.shapeways.com/product/TFG9B ... d=65422357

Tiger was a enlarged version of the torpedo cruisers of the Panther class.

[maxim]

Dutch Fleet Naval Miniatures, 1/700

Proposed variant of the Freedom class as the new USN frigate, FFG(X)
https://www.shapeways.com/product/D9N23 ... arketplace


P. C. Fayard Model Workshop, 1/700

French battleship Bouvet
Four sets of parts:
https://www.shapeways.com/product/TB9GQ ... d=65471659
https://www.shapeways.com/product/VFECA ... d=65557708
https://www.shapeways.com/product/XM9F3 ... d=65557840
https://www.shapeways.com/product/RSST7 ... d=65557898

[Miguel]

In 1/350 scale and great smooth fine plastic detail, a really nice and interesting gunboat from the German Navy
class 420 Thetis boats, beautiful vessels ,this model looks awesome and not to pricey for a printed ship in 1/350 and with FUD
Need 3 parts ,IMO is very desirable
https://www.shapeways.com/product/4TFME ... d=65377454
https://www.shapeways.com/product/YH78A ... areProduct
https://www.shapeways.com/product/EKVZS ... areProduct

[Haijun watcher]

The Shapeways vendor COB Constructs and Miniatures is now offering a 3D-printed St. Louis/Helena class cruiser.

As many here know, these were a sub-class of the Brooklyn class that had significant differences in turret placement/after superstructure, etc., from the rest of the class. With some work, one could modify this printed model to possibly make one of the earlier members of the original class.

[Miguel]

The Shapeways vendor COB Constructs and Miniatures is now offering a 3D-printed St. Louis/Helena class cruiser.
.

Be advised that all of those 3D models printed in White Natural Versatile Plastic ,in my opinion are terrible ,they look like a bar of soap and that grainy finish cannot be worked out to make them a worthy model

[maxim]

Dutch Fleet Naval Miniatures released this model:

Australian Hunter class frigate (Australian version of the Type 26), available in 1/350, 1/600, and 1/700
https://www.shapeways.com/product/TJRBK ... d=66185933

There is also a model of the Type 26:
https://www.shapeways.com/product/YAWGX ... d=60646420

[maxim]

New model by Fpmodel on Shapeways:

Austro-Hungarian coast defence ship SMS Monarch, 1/700, 1/1200, und 1/1250
https://www.shapeways.com/product/L96DN ... arketplace

her sistership SMS Wien:

https://commons.wikimedia.org/wiki/File ... _88936.jpg

[maxim]

Echoco on Shapeways released in 1/700:

German/Italian submarine Type 212 (Klasse 212A), waterline
https://www.shapeways.com/product/QG2S7 ... arketplace


https://commons.wikimedia.org/wiki/File ... uselang=de

There is also a full hull model from the same designer in 1/700 and 1/1250
https://www.shapeways.com/product/WJEWW ... arketplace